6ES7151-1AA04-0AB0 ET200S, IM151-1 STD, 12MBIT/S
From SIEMENS
| *** SPARE PART*** SIMATIC DP, INTERFACE MODULE IM151-1 STANDARD FOR ET200S; INCL. TERMINATING MODULE DATA VOLUME 244BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 PERIPHERIEMODULES PROFIBUS DP V0 AND V1 UP TO 2M WIDTH CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D | ||
| General information | ||
| Vendor identification (VendorID) | 806Ah | |
| Supply voltage | ||
| Mains buffering | ||
| Mains/voltage failure stored energy time | 20 ms | |
| Input current | ||
| from supply voltage 1L+, max. | 200 mA | |
| Power loss | ||
| Power loss, typ. | 3.3 W | |
| Address area | ||
| Addressing volume | ||
| Inputs | 244 byte | |
| Outputs | 244 byte | |
| Interfaces | ||
| Interface physics, RS 485 | Yes; 9-pin sub D socket | |
| PROFIBUS DP | ||
| Output current, max. | 80 mA | |
| Transmission rate, max. | 12 Mbit/s; 9,6 / 19,2 / 45,45 / 93,75 / 187,5 / 500 kbit/s; 1,5 / 3 / 6 / 12 Mbit/s | |
| SYNC capability | Yes | |
| FREEZE capability | Yes | |
| Direct data exchange (slave-to-slave communication) | Yes | |
| Cable length, max. | 1 200 m | |
| Protocols | ||
| PROFIBUS DP | Yes | |
| Isochronous mode | ||
| Isochronous operation (application synchronized up to terminal) | No | |
| Interrupts/diagnostics/status information | ||
| Alarms | Yes | |
| Diagnostics function | Yes | |
| Diagnostics indication LED | ||
| Bus fault BF (red) | Yes | |
| Group error SF (red) | Yes | |
| Monitoring 24 V voltage supply ON (green) | Yes | |
| Potential separation | ||
| between backplane bus and electronics | No | |
| between electronic block and PROFIBUS DP | Yes | |
| between supply voltage and electronics | No | |
| Permissible potential difference | ||
| between different circuits | 75 V DC/60 V AC | |
| Isolation | ||
| Isolation tested with | 500 V DC | |
| Dimensions | ||
| Width | 45 mm | |
| Height | 119.5 mm | |
| Depth | 75 mm | |
| Weights | ||
| Weight, approx. | 150 g | |
| last modified: | 03/13/2019 | |
