6ES7450-1AP01-0AE0
FM 450-1, COUNTER MODULE, 2 CHANNELS

From SIEMENS

SIMATIC S7-400, function module FM 450-1 for counter function with 2 channels incl. configuration package on CD
Supply voltage
Load voltage 1L+
Reverse polarity protectionYes
Load voltage 2L+
Reverse polarity protectionYes
Auxiliary voltage 1L+, load voltage 2L+
Rated value (DC)24 V
permissible range, lower limit (DC)20.4 V; Dynamic 18.5 V
permissible range, upper limit (DC)28.8 V; dynamic 30.2 V
non-periodic skip
— Duration500 ms
— Recovery time50 s
— Value35 V
Input current
from load voltage 1L+ (without load), max.50 mA
from load voltage 2L+ (without load), max.60 µA
from backplane bus 5 V DC, max.300 mA
Encoder supply
5 V encoder supply
5 VYes; 5.2 V ±2 %
Short-circuit protectionYes
Output current, max.300 mA
24 V encoder supply
24 VYes; 1L+ (-3 V)
Short-circuit protectionYes
Output current, max.300 mA
Power loss
Power loss, typ.6 W
Digital inputs
Number of digital inputs6
Functions1 for gate start, 1 for gate stop, 1 for setting the counter
Input voltage
for signal "0"-28.8 ... +5V
for signal "1"+11 to +28.8V
Input current
for signal "1", typ.9 mA
Input delay (for rated value of input voltage)
Input frequency (with a time delay of 0.1 ms), max.200 kHz
for standard inputs
— parameterizableYes
— at "0" to "1", max.2.5 µs; ≥ 2.5 µs (200 kHz); ≤ 25 µs (20 kHz)
Digital outputs
Number of digital outputs4
Short-circuit protectionYes; Clocked electronically
Limitation of inductive shutdown voltage to2L+ (-39 V)
Output voltage
for signal "0", max.3 V
for signal "1", min.2L+ (-1,5 V)
Output current
for signal "1" rated value0.5 A; Res. / P.D. 5 W tungsten 24 V DC
for signal "1" permissible range for 0 to 60 °C, min.5 mA
for signal "1" permissible range for 0 to 60 °C, max.0.6 A
Output delay with resistive load
"0" to "1", max.300 µs
Encoder
Connectable encoders
Incremental encoder (symmetrical)Yes; With 2 pulse trains offset by 90°
Incremental encoder (asymmetrical)Yes
24 V initiatorYes
24 V directional elementYes; 1 pulse train, 1 direction level
Interrupts/diagnostics/status information
Status indicatorYes; 14 green LEDs for status of CR, DIR, inputs and outputs
Diagnostics functionYes
Alarms
Diagnostic alarmYes; Parameterizable
Hardware interruptYes; Parameterizable
Diagnostic messages
Diagnostic information readableYes
Diagnostics indication LED
Description2 red LEDs for internal and external errors
Status indicator digital input (green)Yes
Status indicator digital output (green)Yes
Counter
Number of counter inputs2; 32 bit or ±31 bit
Counter input 5 V
TypeRS 422
Terminating resistor220 Ω
Differential input voltagemin. 0.5 V
Counting frequency, max.500 kHz
Counter input 24 V
Input voltage for signal "0"-30 to +5V
Input voltage for signal "1"+11 to +30V
Input current for signal "1", typ.9 mA
Counting frequency, max.200 kHz
Minimum pulse width≥ 2.5 µs (200 kHz); ≥ 25 µs (20 kHz) (parameterizable)
Parameter
RemarkAssigned binary addresses: 64 bytes/64 bytes
Potential separation
Potential separation digital inputs
between the channels and backplane busYes; Optocoupler
Potential separation digital outputs
between the channels and backplane busYes; Optocoupler
Potential separation counter
between the channels and backplane busYes; Optocoupler
Permissible potential difference
between different circuits75 V DC/60 V AC
Isolation
Isolation tested with500 V
Connection method
required front connector1x 48-pin
Dimensions
Width25 mm
Height290 mm
Depth210 mm
Weights
Weight, approx.650 g
last modified:03/13/2019

External links