ZNX:EIP-200S ETHERNET/IP HEAD ASSEMBLY FOR ET200S
From SIEMENS
SIMATIC DP, Ethernet/IP head assembly for ET 200S, max. 63 I/O modules incl. motor starter no F modules integrated 2-port switch Consisting of: * Head assembly incl. Termination module, * SD card, * Configuration tool (DVD) | ||
General information | ||
Product type designation | Ethernet/IP | |
Vendor identification (VendorID) | 0008h | |
Device identifier (DeviceID) | 0239h | |
Supply voltage | ||
Mains buffering | ||
Mains/voltage failure stored energy time | 20 ms | |
Input current | ||
from supply voltage 1L+, max. | 250 mA | |
Power loss | ||
Power loss, typ. | 2.5 W | |
Address area | ||
Addressing volume | ||
Inputs | 256 byte | |
Outputs | 256 byte | |
Interfaces | ||
Supports protocol for PROFINET IO | ||
automatic detection of transmission rate | Yes | |
Transmission rate, max. | 100 Mbit/s | |
Number of RJ45 ports | 2 | |
Interrupts/diagnostics/status information | ||
Diagnostics indication LED | ||
Monitoring 24 V voltage supply ON (green) | Yes | |
Connection to network LINK (green) | Yes | |
Potential separation | ||
between backplane bus and electronics | No | |
between supply voltage and electronics | No | |
between Ethernet and electronics | Yes | |
Permissible potential difference | ||
between different circuits | 75 V DC/60 V AC | |
Isolation | ||
Isolation tested with | 500 V | |
Standards, approvals, certificates | ||
CE mark | Yes | |
UL approval | Yes | |
Dimensions | ||
Width | 60 mm | |
Height | 119.5 mm | |
Depth | 75 mm | |
Weights | ||
Weight, approx. | 120 g | |
last modified: | 03/13/2019 |